---
title: "55B24 Battery (N45/N40): Specs, Fitment, and Cross-Reference"
id: "310"
type: "post"
slug: "jis-55b24"
published_at: "2026-10-21T05:30:32+00:00"
modified_at: "2026-10-21T05:30:32+00:00"
url: "https://chengguangenergy.com/ar/jis-55b24/"
markdown_url: "https://chengguangenergy.com/ar/jis-55b24.md"
excerpt: "55B24 (N45/N40) battery — 45 Ah, 370 CCA JIS compact. Full specs, 238×129 mm dimensions, vehicle fitment, manufacturing, QC gates, and BCI cross-reference."
taxonomy_category:
  - "Market Standards"
---

> Part of the **[JIS Battery Standard](/ar/jis-battery-standard/)** guide.

The 55B24 is the smallest JIS battery in the Chengguang range — a narrow-frame (129 mm wide) design for compact sedans, hatchbacks, and kei cars where tray space is limited. It delivers 45 Ah and 370 CCA, adequate for 1.3–1.6 L gasoline engines in temperate-to-warm climates.

## Key Takeaways

- **Specs** — 45 Ah (C20), 370 CCA (SAE) in the narrowest JIS case (238 × 129 mm) — for compact cars and 1.3–1.6 L engines.
- **Aliases** — N45 and N40 are regional names for the same 55B24 case; the 45 Ah rating covers both designations.
- **Fitment** — Toyota Vios/Yaris, Honda City/Jazz, Suzuki Swift; verify the ~130 mm tray width first.
- **Mounting** — B00 top-frame hold-down, T1 small posts — do not substitute a DIN (B13) or BCI battery without an adapter.
- **Build** — Calcium-calcium (Ca-Ca) maintenance-free grid, produced on a small-frame automated line at 3,000–4,000 units/day.

## Quick Reference

| المعلمة | المواصفات |
| --- | --- |
| Model | 55B24 |
| Also Known As | N45, N40 |
| قياسي | JIS |
| نوع البطارية | SLI |
| الجهد الاسمي | 12 V |
| السعة (C20) | 45 Ah |
| تصنيف CCA | 370 A (SAE) |
| الأبعاد (الطول × العرض × الارتفاع) | 238 × 129 × 202–227 mm |
| نوع المحطة | T1 small post |
| Polarity | Left (−), Right (+) — JIS type [0] |
| Hold-Down | B00 (الإطار العلوي) |
| الوزن التقريبي | 11–14 kg |
| Chengguang SKU | CG-JIS-55B24 |

> **Specification ranges:** values are typical production ranges. Exact CCA and Ah vary by batch — request the technical data sheet for your order.

## Case & Terminal Identification

The 55B24 is defined by its **129 mm width**, the narrowest case in the Chengguang JIS range. It uses T1 small-post terminals and a B00 top-frame hold-down. The label reads **55B24**, **N45**, or **N40** depending on the target market.

| Identifier | Value | Check |
| --- | --- | --- |
| Case width | 129 mm | Narrow frame (B-series) |
| Case length | 238 mm | Shortest JIS case |
| Terminal | T1 small post | Small-diameter post |
| Hold-down | B00 | Top frame clamp |

Measure the tray width before ordering: a ~130 mm tray points to the 55B24; a ~175 mm tray opens the D-series.

## تطبيقات المركبات

Small passenger cars, compact sedans, and kei cars with 1.3–1.6 L gasoline engines.

| Brand | Compatible Models |
| --- | --- |
| Toyota | Vios, Yaris, Agya, Avanza (some) |
| Honda | City, Jazz, Brio, Mobilio |
| Suzuki | Swift, Dzire, Alto |
| Nissan | March, Almera, Note |
| Daihatsu | Terios, Sirion, Xenia |
| Mitsubishi | Mirage, Attrage |

Fitment is a market-based guide — verify tray dimensions (238 × 129 mm), terminal position, and hold-down type before ordering.

## Regional Markets

| Region | Demand | Segment |
| --- | --- | --- |
| Southeast Asia | Highest volume | Compact car core market |
| Africa | East/West | Compact car segment |
| Middle East | معتدل | Small car segment |
| Oceania | Light | Light vehicles |

## Manufacturing & Grid Alloy

The 55B24 is built on Chengguang’s small-frame automated line in **Jinzhou, Hebei, China** (IATF 16949:2016 certified):

- **Grid alloy** — calcium-calcium (Ca-Ca) for maintenance-free operation with low water loss.
- **Plate design** — reinforced thin plates engineered for reliable starting within the compact 238 × 129 mm envelope.
- **Throughput** — 3,000–4,000 units/day across all brand labels, with full batch traceability from grid casting to container loading.

The same narrow-frame tooling is shared across N45/N40/55B24 labels — only the terminal decal and carton change per market.

## Testing & Quality Control

Every 55B24 passes a two-tier QC gate before release:

| اختبار | قياسي | Pass Criteria | Coverage |
| --- | --- | --- | --- |
| CCA Cold Cranking | SAE J537 at −18 °C | >370 A | 100% |
| Open Circuit Voltage | — | >12.60 V after formation | 100% |
| Visual Inspection | — | Case, terminals, label, polarity | 100% |
| C20 Capacity | IEC 60095-1 | ≥95% of rated 45 Ah | Batch |
| Charge Acceptance | IEC 60095-1 | Current at 14.4 V | Batch |
| Vibration | JIS D 5301 | — | Batch |

> 100% of units are CCA-tested and OCV-checked; capacity, charge acceptance, and vibration are sampled per batch. Every shipment includes a Certificate of Analysis (CoA).

## Charging & Service Life

- **Charge voltage** — standard SLI absorption 14.4–14.8 V; alternator output should sit at 13.8–14.4 V in service.
- **Service life** — 2–4 years in temperate climates; **18–24 months in hot climates (35–45 °C)**, where heat is the dominant aging factor.

## Sizing Check — Worked Example

A 1.5 L gasoline hatchback in two markets shows why the 55B24 is the right call in one and marginal in the other:

1. **Warm climate (SE Asia, 30–40 °C).** A 1.5 L engine needs roughly 300–350 CCA. The 370 CCA rating clears this with margin — heat shortens *life*, not cold-start capability, so the 55B24 is correct.
2. **Cold-winter market (−20 °C).** Apply the ~20% cold-weather CCA margin: 370 × 1.2 ≈ **444 CCA**. The 55B24 is now borderline. If the tray allows (173 mm width), step up to the 55D23 at 500 CCA for guaranteed cold cranking.

Runtime arithmetic: 45 Ah (C20) = 2.25 A for 20 hours. A 5 A accessory load draws the battery to full discharge in ~9 hours (45 ÷ 5) — in practice, keep discharge above ~50% depth to protect cycle life.

## Cross-Reference

| Model | قياسي | Relationship |
| --- | --- | --- |
| N45 | JIS | Alias — same case, 45 Ah class |
| N40 | JIS | Alias — same case, 40 Ah class |

The 55B24 rating of 45 Ah covers both the N45 and N40 designations. There is **no direct DIN equivalent** for the 129 mm narrow frame — the closest DIN (56638/DIN66) is a 175 mm-wide case, so DIN-to-JIS substitution here always requires a tray adapter.

## Cross-Standard Equivalents

| قياسي | Model | Confidence | Note |
| --- | --- | --- | --- |
| BCI | Group 35 / 51R | Medium | Verify terminal type and tray |

> Cross-standard matches are dimensional approximations only — electrical specs differ by standard and test method. Always verify tray dimensions, terminal type, and hold-down (B00 vs B13) before substituting.

## OEM & Private Label Availability

The 55B24 is available for **OEM manufacturing** under your brand from Chengguang Power Tech:

- Custom label, case color, terminal type, and retail packaging
- Full batch traceability — raw material lot to shipping container
- 100% pre-shipment CCA and capacity testing with CoA
- تغليف تصديري متوافق مع معايير DG (رقم الأمم المتحدة 2794 / الفئة 8)
- Technical data sheet, MSDS, and Certificate of Analysis per shipment

[Request OEM Quote](https://chengguangenergy.com/ar/contact/)
 · [View OEM Process](https://oem.chengguangenergy.com/oem-process/)

## الأسئلة الشائعة

**Is N45 the same as 55B24?** Yes — N45 (and N40) are regional names for the same 55B24 case; the 45 Ah rating covers both designations.

**Can I upgrade from 55B24 to 55D23?** Only if the tray allows — the 55D23 is 44 mm wider (173 vs 129 mm). Measure before buying.

**What BCI group replaces a 55B24?** Group 35/51R is the closest cross-reference, but BCI mounting differs from JIS B00 — verify terminal type and tray dimensions.

**How long does a 55B24 last?** 2–4 years in temperate climates; 18–24 months in hot climates. Regular charging-system checks (alternator 13.8–14.4 V) extend service life.

**Is the 55B24 maintenance-free?** Yes — the Ca-Ca grid alloy minimizes water loss, so no electrolyte topping-up is required under normal operation.

## Related Models

- [55D23 Battery](/ar/jis-55d23/) — wider (173 mm), higher capacity (60 Ah). Upgrade if the tray allows.
- [65D26 Battery](/ar/jis-65d26/) — full-size (260 × 173 mm) upgrade for larger vehicles.
- [55B24 — Full Specification](https://data.chengguangenergy.com/battery-models/jis/55b24/)
- [JIS Battery Standard Guide](/ar/jis-battery-standard/)
- [Request OEM Quote](https://chengguangenergy.com/ar/contact/)

## Author & Factory Credentials

Authored by the **Chengguang Engineering Team** — application and process engineers at Chengguang Power Tech, an automotive battery manufacturer in Jinzhou, Hebei, China. Content is reviewed by the **IATF 16949 Quality Department** against production data and third-party test reports before publication.

**Factory certifications:** IATF 16949 (automotive quality) · ISO 9001 (quality management) · ISO 45001 (occupational safety) · CE marking (EU compliance).

Full test reports and the Certificate of Analysis (CoA) are published on the [Battery Database](https://data.chengguangenergy.com/battery-models/)
 and ship with every order.

## Sources & Verification

Specifications on this page are sourced from Chengguang Power Tech factory technical documentation and tested to JIS D 5301, DIN EN 50342-1, SAE J537, and IEC 60095-1. Contact Chengguang for the exact data sheet. Every batch ships with a Certificate of Analysis (CoA).

*Author: Chengguang Engineering Team · Reviewed: IATF 16949 Quality Department · Last updated: 2026-08-19*

## موضوعات ذات صلة

- 60038 (DIN100) battery — 100 Ah, 870 CCA DIN flagship. Specs, 393×175 mm dimensions, fitment, manufacturing, QC gates, and cross-reference.
- Why Battery Standards Matter for Your Import Business Ordering the wrong battery standard can result in batteries that physically do not fit your customers’ vehicles. For OEM importers, getting the standard right is job one. This guide explains the major global battery standards, their differences, and how to build a standard-appropriate product lineup for your…
- 105D31 (95D31/N90/N80/N70) battery — 90 Ah, 650 CCA JIS. Specs, 306×173 mm dimensions, fitment, manufacturing, QC gates, and BCI Group 27 cross-reference.
- 57412/57413 (DIN75) battery — 75 Ah DIN. Specs, variants, B13 mounting, manufacturing, QC gates, and cross-reference. CCA 660 A (EN).
- 57219 (DIN72) battery — 72 Ah DIN. Specs, B13 mounting, manufacturing, QC gates, and cross-reference. CCA 630 A (EN).
- 145G51 (N150) heavy-duty battery — 120–135 Ah, 800–900 CCA. Specs, 508×222 mm dimensions, truck/bus fitment, Pb-Sb construction, QC gates, and cross-reference.

### اترك تعليقاً [إلغاء الرد](/ar/jis-55b24/#respond)