---
title: "57117 (DIN70) Battery for Passenger Cars: Application Guide"
id: "319"
type: "post"
slug: "din-57117-car"
published_at: "2026-11-08T05:30:32+00:00"
modified_at: "2026-11-08T05:30:32+00:00"
url: "https://chengguangenergy.com/es/din-57117-car/"
markdown_url: "https://chengguangenergy.com/es/din-57117-car.md"
excerpt: "57117 (DIN70) 70 Ah DIN battery for passenger cars — 600 A (EN) (ref.) CCA, 273 × 174 × 175 mm (ref.) case, B13 (bottom rail) mounting."
taxonomy_category:
  - "Battery Technology"
---

> Part of the **[Passenger Cars](/es/car-battery/)** guide.

The 57117 (DIN70) is a 70 Ah DIN battery in a 273 × 174 × 175 mm (ref.) case, European mid-size sedans — the 600 A (EN) (ref.) cold-cranking rating and 273 × 174 × 175 mm (ref.) case are the two numbers that decide fit.

## Key Takeaways

- **Spec** — 70 Ah C20, 600 A (EN) (ref.) CCA, 273 × 174 × 175 mm (ref.), B13 (bottom rail) hold-down, DIN post.
- **Application** — passenger cars.
- **Fit** — European mid-size sedans — the 600 A (EN) (ref.) cold-cranking rating and 273 × 174 × 175 mm (ref.) case are the two numbers that decide fit.
- **Usable capacity** — ~35 Ah at 50% DoD for deep-cycling duty.

## DIN70 Specifications

| Parameter | Specification |
| --- | --- |
| Model | 57117 |
| Also Known As | DIN70 |
| Estándar | DIN |
| Capacity (C20) | 70 Ah |
| CCA Rating | 600 A (EN) (ref.) |
| Dimensions (L×W×H) | 273 × 174 × 175 mm (ref.) |
| Terminal Type | DIN post |
| Hold-Down | B13 (bottom rail) |

## Passenger Cars Requirements → DIN70 Match

| Requirement | DIN70 | Verdict |
| --- | --- | --- |
| Cold cranking (CCA) | 600 A (EN) (ref.) | ✓ |
| Tray fit (case) | 273 × 174 × 175 mm (ref.) | ✓ |
| Mounting | B13 (bottom rail) | ✓ |
| Reserve for accessories | 70 Ah | ✓ |

## Cross-Standard Equivalent

| Estándar | Equivalent | Confidence | Note |
| --- | --- | --- | --- |
| BCI | Group 48 (H6) | Medium | Same footprint — verify terminals |

> Cross-standard matches are dimensional approximations. Always verify tray length, terminal type, and hold-down before substituting.

## Fitment Considerations

- Match CCA to the engine: a larger engine or a diesel needs more cold-cranking current than the label capacity suggests.
- The case must drop into the OEM tray — verify length/width/height and the hold-down style before ordering.
- **Reserve capacity** — a higher Ah gives more accessory margin for stop-start and accessory-heavy cars.

## What Buyers Should Ask

Before ordering the 57117 Battery — DIN70 for passenger-car, confirm these points with the supplier:

- **CCA standard** — 600 A (EN); verify the test method (EN vs SAE) printed on the label matches your region’s convention.
- **Capacity** — 70 Ah; enough reserve for the passenger-car accessory load.
- **Case fit** — 273 × 174 × 175 mm (industry ref.); measure the tray and confirm the B13 (bottom rail) hold-down.
- **Terminals** — Standard DIN post; check polarity and post type against the harness.
- **Data sheet** — request the production Certificate of Analysis (CoA) for exact batch values.

## Preguntas frecuentes

**What engine does it start?** European mid-size sedans — the 600 A (EN) (ref.) CCA covers European mid-size sedans. Check the OEM tray takes the 273 × 174 × 175 mm (ref.) case.

**Higher Ah or higher CCA?** CCA matters for cranking and Ah for accessory reserve. The 70 Ah / 600 A (EN) (ref.) balance suits European mid-size sedans.

**Is a bigger battery always better?** No — only if the tray fits and the charging system matches. Oversizing adds weight and cost without cranking benefit.

## Related Articles

- [56638 (DIN66) for Passenger Cars](/es/din-56638-car/)
- [57219 (DIN72) for Passenger Cars](/es/din-57219-car/)
- [57117 Battery — Full Specs](/es/din-57117/)
- [Passenger Cars Guide](/es/car-battery/)
- [Request OEM Quote](https://chengguangenergy.com/es/contacto/)

## Sources & Verification

Specifications sourced from Chengguang Power Tech factory technical documentation and tested to DIN EN 50342-1, SAE J537, and IEC 60095-1. Figures marked “(ref.)” are third-party manufacturer catalog reference values — always confirm against the production data sheet. Every batch ships with a Certificate of Analysis (CoA).

*Author: Chengguang Engineering Team · Reviewed: IATF 16949 Quality Department · Last updated: 2026-08-26*

## Publicaciones Similares

- Por qué es importante la elección del tipo de batería para los importadores: a la hora de adquirir baterías de automóvil para tu mercado, elegir un tipo inadecuado puede suponer un coste en reclamaciones de garantía, satisfacción del cliente y reputación de la marca. Este artículo analiza los cuatro tipos de baterías disponibles de los fabricantes de equipo original (OEM), sus aplicaciones ideales y cómo determinar qué tipos deben formar parte de tu gama de productos….
- AGM (absorbent glass mat) battery guide — how AGM works, cycle life and charge acceptance, AGM vs EFB vs flooded SLI, and when to choose AGM for start-stop and…
- 56638 (DIN66) 66 Ah DIN battery for ups / backup power — 540 A (SAE) CCA, 278 × 175 × 175–190 mm case, B13 (bottom rail) mounting.
- EFB (enhanced flooded battery) guide — how EFB works, EFB vs AGM vs standard flooded, and when EFB is the right entry-level start-stop battery.
- UPS battery guide — why VRLA not automotive for float service, AGM vs GEL, sizing a UPS battery with Peukert, and design life by grade.
- DIN battery standard guide — how to read a DIN model number, B13 bottom-rail mounting, the 7-model Chengguang DIN range, and DIN vs JIS interchange.

### Deja una respuesta [Cancelar la respuesta](/es/din-57117-car/#respond)