{"id":297,"date":"2026-09-25T05:30:32","date_gmt":"2026-09-25T05:30:32","guid":{"rendered":"https:\/\/chengguangenergy.com\/"},"modified":"2026-09-25T05:30:32","modified_gmt":"2026-09-25T05:30:32","slug":"sli-starting-battery","status":"publish","type":"post","link":"https:\/\/chengguangenergy.com\/es\/sli-starting-battery\/","title":{"rendered":"SLI Starting Battery: Complete Guide to Starting, Lighting, Ignition Batteries"},"content":{"rendered":"<p>An <strong>SLI (Starting, Lighting, Ignition) battery<\/strong> is a flooded lead-acid battery built for one job: delivering a short, high-current burst (300\u2013900 A) to crank an internal combustion engine, then recharging immediately from the alternator. It is the highest-volume battery technology on the market \u2014 roughly 60\u201365% of global automotive battery production \u2014 and it is Chengguang Power Tech&#8217;s core product line, run across 18 automated assembly lines at 40,000 units per day for export to 70+ countries.<\/p>\n<p>This page covers how SLI batteries work, the full Chengguang SLI range, and how to select the correct model.<\/p>\n<h2>Key Takeaways<\/h2>\n<ul>\n<li><strong>What it is<\/strong> \u2014 An SLI battery delivers a short 300\u2013900 A burst to crank the engine, then recharges from the alternator \u2014 built for starting, not deep discharge.<\/li>\n<li><strong>Range<\/strong> \u2014 Chengguang manufactures 14 starting models (7 JIS + 7 DIN), 45\u2013200 Ah and 370\u20131,100 CCA, on 18 lines at 40,000 units\/day.<\/li>\n<li><strong>Key specs<\/strong> \u2014 CCA = starting power (30 s at \u221218 \u00b0C above 7.2 V); C20 (Ah) = reserve capacity \u2014 verify both on the label.<\/li>\n<li><strong>Mounting<\/strong> \u2014 JIS (B00 top clamp) and DIN (B13 bottom rail) do not interchange without an adapter \u2014 match the standard first.<\/li>\n<li><strong>Service life<\/strong> \u2014 3\u20135 years temperate; 18\u201330 months in hot (35\u201345 \u00b0C) markets.<\/li>\n<\/ul>\n<h2>How an SLI Battery Works<\/h2>\n<p>SLI chemistry is lead-acid. Positive plates are lead dioxide (PbO\u2082), negative plates are sponge lead (Pb), and the electrolyte is a 37% sulfuric acid (H\u2082SO\u2084) solution. During discharge both plate types convert to lead sulfate (PbSO\u2084) and the electrolyte thins out; the alternator reverses the reaction during recharge.<\/p>\n<p>The design trade-off that defines an SLI battery is <strong>thin plates, maximum surface area<\/strong>. A 12 V battery stacks six 2.1 V cells in series, each packed with many thin plates to maximize the plate-to-electrolyte contact area that produces cranking current. The result is high burst power but poor tolerance for deep discharge \u2014 draining an SLI battery to 50% depth-of-discharge repeatedly will sulfate and destroy the plates.<\/p>\n<p>Chengguang SLI grids are cast from <strong>calcium-calcium (Ca-Ca) alloy<\/strong>, which cuts water loss to near zero and makes the battery maintenance-free. Separators are microporous polyethylene (PE).<\/p>\n<table>\n<thead>\n<tr>\n<th>SLI Technical Parameters<\/th>\n<th>Value<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Nominal voltage<\/td>\n<td>12 V (6 \u00d7 2.1 V cells)<\/td>\n<\/tr>\n<tr>\n<td>CCA range (Chengguang range)<\/td>\n<td>370\u20131,100 A (SAE)<\/td>\n<\/tr>\n<tr>\n<td>Capacity range (Chengguang range)<\/td>\n<td>45\u2013200 Ah (C20)<\/td>\n<\/tr>\n<tr>\n<td>Operating temperature<\/td>\n<td>\u221230 \u00b0C to +60 \u00b0C<\/td>\n<\/tr>\n<tr>\n<td>Cycle life (to 50% DoD)<\/td>\n<td>200\u2013500 cycles<\/td>\n<\/tr>\n<tr>\n<td>Self-discharge<\/td>\n<td>3\u20135% per month at 25 \u00b0C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>The Chengguang SLI Range: 14 Models<\/h2>\n<p>Chengguang manufactures <strong>14 starting-battery models<\/strong> across two standards \u2014 7 JIS and 7 DIN \u2014 spanning 45 Ah to 200 Ah. Twelve are standard SLI construction; the two largest (145G51, 190H52) use heavy-duty thick-plate construction for commercial vehicles but serve the same starting function.<\/p>\n<p>| Model | Standard | Type | Voltage | C20 (Ah) | CCA (SAE) | Dimensions (mm) | Weight (kg) |<br \/>\n|&#8212;|&#8212;|&#8212;:|&#8212;:|&#8212;:|&#8212;|&#8212;|<br \/>\n| 55B24 | JIS | SLI | 12 V | 45 | 370 | 238 \u00d7 129 \u00d7 202\u2013227 | 11\u201314 |<br \/>\n| 55D23 | JIS | SLI | 12 V | 60 | 500 | 232 \u00d7 173 \u00d7 202\u2013225 | 13\u201316 |<br \/>\n| 65D26 | JIS | SLI | 12 V | 55\u201370 | 450\u2013580 | 260 \u00d7 173 \u00d7 202\u2013225 | 14\u201318 |<br \/>\n| 95E41 | JIS | SLI | 12 V | 100 | 750 | 410 \u00d7 176 \u00d7 213\u2013233 | 22\u201326 |<br \/>\n| 105D31 | JIS | SLI | 12 V | 90 | 650 | 306 \u00d7 173 \u00d7 202\u2013225 | 19\u201323 |<br \/>\n| 145G51 | JIS | Heavy Duty | 12 V | 120\u2013135 | 800\u2013900 | 508 \u00d7 222 \u00d7 212\u2013240 | 30\u201338 |<br \/>\n| 190H52 | JIS | Heavy Duty | 12 V | 200 | 1,100 | 521 \u00d7 278 \u00d7 220\u2013270 | 45\u201355 |<br \/>\n| 56638 (DIN66) | DIN | SLI | 12 V | 66 | 540 | 278 \u00d7 175 \u00d7 175\u2013190 | 15\u201318 |<br \/>\n| 57117 (DIN70) | DIN | SLI | 12 V | 70 | 600 A (EN)<em> | 273 \u00d7 174 \u00d7 175 | ~18 kg |<br \/>\n| 57219 (DIN72) | DIN | SLI | 12 V | 72 | 630 A (EN)<\/em> | 278 \u00d7 175 \u00d7 190 | ~17.5 kg |<br \/>\n| 57412 (DIN75) | DIN | SLI | 12 V | 75 | 660 A (EN)<em> | 276 \u00d7 175 \u00d7 175 | ~19.1 kg |<br \/>\n| 58043 (DIN80) | DIN | SLI | 12 V | 80 | 750 A (EN)<\/em> | 315 \u00d7 175 \u00d7 175\u2013190 | ~20.2 kg |<br \/>\n| 58827 (DIN88) | DIN | SLI | 12 V | 88 | 800 A (EN)* | 353 \u00d7 175 \u00d7 175\u2013190 | ~22.6 kg |<br \/>\n| 60038 (DIN100) | DIN | SLI | 12 V | 100 | 870 | 393 \u00d7 175 \u00d7 175\u2013190 | 22\u201326 |<\/p>\n<blockquote>\n<p><strong>Note:<\/strong> Values are typical production ranges. DIN70\u2013DIN88 CCA figures are confirmed from the official Chengguang product specification (EN 50342-1). Contact Chengguang for the exact data sheet for your order.<\/p>\n<\/blockquote>\n<h3>Capacity Classes<\/h3>\n<table>\n<thead>\n<tr>\n<th>Capacity Class<\/th>\n<th>Models<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>40\u201350 Ah<\/td>\n<td>55B24<\/td>\n<\/tr>\n<tr>\n<td>55\u201365 Ah<\/td>\n<td>55D23, 65D26, 56638<\/td>\n<\/tr>\n<tr>\n<td>70\u201380 Ah<\/td>\n<td>57117, 57219, 57412, 58043<\/td>\n<\/tr>\n<tr>\n<td>85\u2013100 Ah<\/td>\n<td>95E41, 105D31, 58827, 60038<\/td>\n<\/tr>\n<tr>\n<td>120\u2013200 Ah<\/td>\n<td>145G51, 190H52<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h3>JIS vs DIN \u2014 Two Mounting Systems<\/h3>\n<p>The single most important distinction when buying an SLI battery is the <strong>standard<\/strong>, because JIS and DIN batteries are not physically interchangeable:<\/p>\n<table>\n<thead>\n<tr>\n<th>Attribute<\/th>\n<th>JIS<\/th>\n<th>DIN<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Region<\/td>\n<td>Asia, Africa, Middle East, Oceania<\/td>\n<td>Europe, Africa, Middle East<\/td>\n<\/tr>\n<tr>\n<td>Terminal<\/td>\n<td>T1 post (small\/large)<\/td>\n<td>Standard DIN post<\/td>\n<\/tr>\n<tr>\n<td>Hold-down<\/td>\n<td>B00 (top frame clamp)<\/td>\n<td>B13 (bottom rail lip)<\/td>\n<\/tr>\n<tr>\n<td>Code system<\/td>\n<td>Performance class + size (e.g. 65D26)<\/td>\n<td>5-digit numeric (e.g. 56638)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>A DIN battery uses a B13 lip molded into the case base that slides under a rail in the tray; a JIS battery uses a B00 metal frame clamped across the top. The two systems will not interchange without an adapter.<\/p>\n<h3>Reading the CCA Rating: One Battery, Four Numbers<\/h3>\n<p>CCA is not a single universal number. Each standard tests at a different temperature and duration, so the same physical battery carries different CCA labels by market:<\/p>\n<table>\n<thead>\n<tr>\n<th>CCA Standard<\/th>\n<th>Test Temp<\/th>\n<th>Duration<\/th>\n<th>Test Basis<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>SAE J537 (North America)<\/td>\n<td>\u221218 \u00b0C<\/td>\n<td>30 s<\/td>\n<td>Chengguang catalog reference<\/td>\n<\/tr>\n<tr>\n<td>EN 50342-1 (Europe)<\/td>\n<td>\u221218 \u00b0C<\/td>\n<td>10 s + 30 s<\/td>\n<td>Different pass criteria<\/td>\n<\/tr>\n<tr>\n<td>DIN 43539 (Germany)<\/td>\n<td>\u221218 \u00b0C<\/td>\n<td>30 s<\/td>\n<td>Legacy German method<\/td>\n<\/tr>\n<tr>\n<td>JIS D 5301 (Japan)<\/td>\n<td>\u221215 \u00b0C<\/td>\n<td>varies<\/td>\n<td>Warmer test point<\/td>\n<\/tr>\n<tr>\n<td>IEC 60095-1 \/ GB\/T 5008<\/td>\n<td>\u221218 \u00b0C<\/td>\n<td>30 s<\/td>\n<td>Closely aligned with SAE<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Because the test procedures differ, CCA values are not directly interchangeable across standards. Before comparing two batteries, confirm both labels reference the same standard \u2014 a 450 EN battery is not weaker than a 500 SAE battery.<\/p>\n<h3>Decoding a JIS Model Code<\/h3>\n<p>JIS codes are structured, not arbitrary. Taking <strong>65D26<\/strong>:<\/p>\n<table>\n<thead>\n<tr>\n<th>Segment<\/th>\n<th>Meaning<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>65<\/strong><\/td>\n<td>Performance class \u2014 capacity\/CCA tier (higher = more)<\/td>\n<\/tr>\n<tr>\n<td><strong>D<\/strong><\/td>\n<td>Width class \u2014 D \u2248 173 mm wide case<\/td>\n<\/tr>\n<tr>\n<td><strong>26<\/strong><\/td>\n<td>Case length in centimetres (26 cm = 260 mm)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>One width class hosts multiple performance tiers and lengths: 65D26 (~65 Ah \/ ~550 CCA), 55D26 (~55 Ah \/ ~450 CCA), and the longer 105D31 (~90 Ah \/ ~650 CCA) all belong to the D-series. Read the full code \u2014 the middle letter alone does not identify the battery.<\/p>\n<h3>Terminal Dimensions and Polarity<\/h3>\n<table>\n<thead>\n<tr>\n<th>Terminal Type<\/th>\n<th>Positive Post<\/th>\n<th>Negative Post<\/th>\n<th>Used By<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>T1 small post<\/td>\n<td>Smaller diameter<\/td>\n<td>Smaller diameter<\/td>\n<td>55B24\u201395E41 (compact\/mid JIS)<\/td>\n<\/tr>\n<tr>\n<td>T1 large post<\/td>\n<td>\u220519.5 mm<\/td>\n<td>\u220517.9 mm<\/td>\n<td>145G51, 190H52<\/td>\n<\/tr>\n<tr>\n<td>DIN standard post<\/td>\n<td>\u220519.5 mm<\/td>\n<td>\u220517.9 mm<\/td>\n<td>All 7 DIN models<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>JIS type [0] and DIN type [0] are both left-negative \/ right-positive when viewed from the terminal side. Confirm polarity before ordering \u2014 a reversed-polarity battery is the fastest way to damage a vehicle&#8217;s electronics.<\/p>\n<h3>Cross-Standard Equivalents (Dimensional, Not Electrical)<\/h3>\n<p>Chengguang&#8217;s JIS and DIN ranges overlap by market segment. The table lists the closest dimensional neighbours \u2014 <strong>not<\/strong> electrical equivalents:<\/p>\n<table>\n<thead>\n<tr>\n<th>JIS Model<\/th>\n<th>DIN Neighbour<\/th>\n<th>BCI Group<\/th>\n<th>Fit Match<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>55B24<\/td>\n<td>\u2014<\/td>\n<td>Group 35 \/ 51R<\/td>\n<td>Verify CCA<\/td>\n<\/tr>\n<tr>\n<td>65D26<\/td>\n<td>56638 (DIN66)<\/td>\n<td>Group 48 (H6)<\/td>\n<td>Verify<\/td>\n<\/tr>\n<tr>\n<td>105D31<\/td>\n<td>58043 (DIN80)<\/td>\n<td>Group 27<\/td>\n<td>Verify terminals<\/td>\n<\/tr>\n<tr>\n<td>95E41<\/td>\n<td>58827 (DIN88)<\/td>\n<td>Group 49 (H8)<\/td>\n<td>Different (longer)<\/td>\n<\/tr>\n<tr>\n<td>145G51<\/td>\n<td>60038 (DIN100)<\/td>\n<td>Group 31<\/td>\n<td>Different (heavy duty)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>These mappings are physical approximations only. Hold-down (B00 vs B13), terminal type, and CCA test method all differ \u2014 confirm all three before cross-shopping a JIS battery into a DIN vehicle or vice versa.<\/p>\n<h2>Buying Considerations<\/h2>\n<ol>\n<li><strong>Match the standard first.<\/strong> Check the vehicle manual or measure the tray and mounting. Getting the standard wrong is the most common fitment failure.<\/li>\n<li><strong>CCA is the starting-power spec.<\/strong> CCA is the current (A) a battery delivers for 30 s at \u221218 \u00b0C while staying above 7.2 V. Gasoline compacts need 370\u2013500 A; V6\/V8 diesels need 750\u20131,100 A. Add ~20% for cold climates below \u221220 \u00b0C.<\/li>\n<li><strong>Capacity (C20) is the reserve spec.<\/strong> Ah matters for running accessories with the engine off and for deep-cycle-adjacent duty. Verify the Ah on the label \u2014 the same case can carry different ratings (e.g. N70\/N80\/N90 all share the 105D31 case).<\/li>\n<li><strong>Terminal type and polarity.<\/strong> JIS type [0] is left-negative \/ right-positive; DIN post is \u220519.5 mm positive, \u220517.9 mm negative. Confirm polarity before ordering.<\/li>\n<li><strong>Heat shortens life.<\/strong> In hot markets (Middle East, Africa, 35\u201345 \u00b0C), typical service life drops to 18\u201330 months versus 3\u20135 years in temperate climates.<\/li>\n<\/ol>\n<table>\n<thead>\n<tr>\n<th>CCA Requirement by Engine<\/th>\n<th>Typical CCA (SAE)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>4-cyl gasoline (1.3\u20132.0 L)<\/td>\n<td>370\u2013500<\/td>\n<\/tr>\n<tr>\n<td>V6 gasoline (2.5\u20133.5 L)<\/td>\n<td>500\u2013650<\/td>\n<\/tr>\n<tr>\n<td>V8 gasoline (&gt;4.0 L)<\/td>\n<td>650\u2013850<\/td>\n<\/tr>\n<tr>\n<td>4-cyl diesel (2.0\u20133.0 L)<\/td>\n<td>550\u2013750<\/td>\n<\/tr>\n<tr>\n<td>V6\/V8 diesel (&gt;3.0 L)<\/td>\n<td>750\u20131,100<\/td>\n<\/tr>\n<tr>\n<td>Heavy truck diesel (&gt;8.0 L)<\/td>\n<td>900\u20131,200+<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Worked Sizing Examples<\/h2>\n<p><strong>Example 1 \u2014 CCA for a 3.0 L diesel in a cold climate.<\/strong> A 3.0 L four-cylinder turbo-diesel SUV operates where winter reaches \u221225 \u00b0C:<\/p>\n<ol>\n<li>Base CCA from the engine table: 4-cyl diesel spans 550\u2013750 A \u2014 take ~700 A for a 3.0 L.<\/li>\n<li>Cold-climate adjustment: +20% below \u221220 \u00b0C \u2192 700 \u00d7 1.20 = <strong>840 A<\/strong>.<\/li>\n<li>Nearest model at or above: <strong>60038 (870 A)<\/strong> in DIN, or a heavy-duty <strong>145G51 (800\u2013900 A)<\/strong> if the tray accepts JIS. A 95E41 (750 A) falls short.<\/li>\n<\/ol>\n<p><strong>Example 2 \u2014 Verifying the label standard.<\/strong> A distributor quotes &#8220;700 CCA&#8221; for a 105D31; the factory sheet lists 650 A (SAE). EN-rated, the same battery would read ~715\u2013750 A; JIS-rated, ~455\u2013553 A. The quote is an EN\/DIN conversion, not a higher-spec battery \u2014 confirm the standard before ordering into a cold market.<\/p>\n<p><strong>Example 3 \u2014 Capacity de-rates with discharge rate.<\/strong> A 100 Ah (C20) 95E41 discharged at the 5-hour rate delivers roughly 85% of label capacity \u2014 <strong>~85 Ah<\/strong>, not 100. This is Peukert&#8217;s Law: faster current draw yields less total energy, because internal resistance and electrolyte diffusion losses grow with rate.<\/p>\n<table>\n<thead>\n<tr>\n<th>Discharge Rate<\/th>\n<th>Typical Capacity (% of C20)<\/th>\n<th>Use Case<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>C20 (20 h)<\/td>\n<td>100%<\/td>\n<td>Industry standard rating<\/td>\n<\/tr>\n<tr>\n<td>C10 (10 h)<\/td>\n<td>~93%<\/td>\n<td>UPS \/ telecom rating<\/td>\n<\/tr>\n<tr>\n<td>C5 (5 h)<\/td>\n<td>~85%<\/td>\n<td>Faster discharge (traction)<\/td>\n<\/tr>\n<tr>\n<td>C1 (1 h)<\/td>\n<td>~65%<\/td>\n<td>High-rate discharge<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Application Scenarios<\/h2>\n<table>\n<thead>\n<tr>\n<th>Vehicle Type<\/th>\n<th>Recommended Models<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Compact car \/ hatchback<\/td>\n<td>55B24<\/td>\n<\/tr>\n<tr>\n<td>Mid-size sedan<\/td>\n<td>55D23, 65D26, 56638<\/td>\n<\/tr>\n<tr>\n<td>Large sedan \/ SUV<\/td>\n<td>65D26, 95E41, 105D31, 58043<\/td>\n<\/tr>\n<tr>\n<td>Luxury \/ premium<\/td>\n<td>95E41, 58827, 60038<\/td>\n<\/tr>\n<tr>\n<td>Pickup \/ light truck<\/td>\n<td>105D31, 58043<\/td>\n<\/tr>\n<tr>\n<td>Medium truck \/ bus<\/td>\n<td>145G51<\/td>\n<\/tr>\n<tr>\n<td>Heavy truck \/ equipment<\/td>\n<td>190H52<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Testing &amp; Quality Control<\/h2>\n<p>Every Chengguang SLI battery passes a fixed test gate before it leaves the line:<\/p>\n<table>\n<thead>\n<tr>\n<th>Test<\/th>\n<th>Standard<\/th>\n<th>Pass Criteria<\/th>\n<th>Coverage<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>CCA cold cranking<\/td>\n<td>SAE J537 at \u221218 \u00b0C<\/td>\n<td>Sustained 30 s, &gt;7.2 V<\/td>\n<td>100%<\/td>\n<\/tr>\n<tr>\n<td>Open-circuit voltage<\/td>\n<td>\u2014<\/td>\n<td>&gt;12.60 V after formation<\/td>\n<td>100%<\/td>\n<\/tr>\n<tr>\n<td>High-rate discharge<\/td>\n<td>30-second test<\/td>\n<td>Voltage stability<\/td>\n<td>100%<\/td>\n<\/tr>\n<tr>\n<td>Visual inspection<\/td>\n<td>\u2014<\/td>\n<td>Case, terminals, label, polarity<\/td>\n<td>100%<\/td>\n<\/tr>\n<tr>\n<td>C20 capacity<\/td>\n<td>IEC 60095-1<\/td>\n<td>\u226595% of rated Ah<\/td>\n<td>Batch (1:500)<\/td>\n<\/tr>\n<tr>\n<td>Reserve capacity<\/td>\n<td>SAE J537<\/td>\n<td>25 A to 10.5 V<\/td>\n<td>Batch (1:500)<\/td>\n<\/tr>\n<tr>\n<td>Charge acceptance<\/td>\n<td>IEC 60095-1<\/td>\n<td>Current at 14.4 V<\/td>\n<td>Batch (1:500)<\/td>\n<\/tr>\n<tr>\n<td>Vibration<\/td>\n<td>JIS D 5301<\/td>\n<td>3g RMS, 8 hours<\/td>\n<td>Batch (1:2000)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>How an SLI Battery Is Manufactured<\/h2>\n<p>A production SLI battery passes five manufacturing stages before it leaves the line \u2014 each one determines real-world service life:<\/p>\n<table>\n<thead>\n<tr>\n<th>Stage<\/th>\n<th>Process<\/th>\n<th>Key Parameter<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>1. Grid casting<\/td>\n<td>Pb-Ca (0.06\u20130.09% Ca, 0.3\u20131.5% Sn) alloy gravity-cast into book molds at 480\u2013520 \u00b0C<\/td>\n<td>Grid wire 1.5\u20132.0 mm, weight \u00b12%<\/td>\n<\/tr>\n<tr>\n<td>2. Plate pasting<\/td>\n<td>PbO paste forced into grids on a continuous belt paster<\/td>\n<td>Paste density 4.0\u20134.3 g\/cm\u00b3<\/td>\n<\/tr>\n<tr>\n<td>3. Curing<\/td>\n<td>24\u201372 h in multi-zone chambers (35\u201385 \u00b0C, 95%+ RH)<\/td>\n<td>Free lead &lt;2%, 3BS crystal structure<\/td>\n<\/tr>\n<tr>\n<td>4. Formation<\/td>\n<td>Multi-step charge over 18\u201348 h converts paste to PbO\u2082\/Pb<\/td>\n<td>Specific gravity 1.275\u20131.285<\/td>\n<\/tr>\n<tr>\n<td>5. Final test<\/td>\n<td>100% CCA, OCV, leak, visual, weight gate<\/td>\n<td>CCA &gt;spec, OCV &gt;12.60 V<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Chengguang uses <strong>gravity casting<\/strong> (not expanded metal) for superior corrosion resistance, and <strong>3BS curing<\/strong> (not 4BS) for maximum initial capacity in passenger SLI \u2014 the same trade-off premium OEMs make.<\/p>\n<h2>Reserve Capacity: The Overlooked Spec<\/h2>\n<p>Reserve capacity (RC) is the number of minutes a battery holds 25 A at 27 \u00b0C before dropping below 10.5 V \u2014 your alternator-failure safety margin. It is the number that matters when the engine is off but the loads stay on.<\/p>\n<table>\n<thead>\n<tr>\n<th>Vehicle Class<\/th>\n<th style=\"text-align: right;\">Typical RC<\/th>\n<th>Why It Matters<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Compact car<\/td>\n<td style=\"text-align: right;\">60\u201390 min<\/td>\n<td>Headlights + ignition + ECU<\/td>\n<\/tr>\n<tr>\n<td>Mid-size sedan<\/td>\n<td style=\"text-align: right;\">90\u2013120 min<\/td>\n<td>Adds infotainment, HVAC<\/td>\n<\/tr>\n<tr>\n<td>Large SUV \/ light truck<\/td>\n<td style=\"text-align: right;\">150\u2013180 min<\/td>\n<td>Adds winches, aux lights, inverters<\/td>\n<\/tr>\n<tr>\n<td>Heavy-duty truck<\/td>\n<td style=\"text-align: right;\">200\u2013400 min<\/td>\n<td>Reefer, liftgate, telematics<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>A higher-Ah battery within the same case delivers a proportionally higher RC \u2014 the practical reason to buy a 95E41 over a 65D26 when the tray allows.<\/p>\n<h2>Frequently Asked Questions<\/h2>\n<p><strong>What is the difference between SLI and deep-cycle batteries?<\/strong> SLI batteries deliver short, high-current bursts for starting and recharge immediately from the alternator. Deep-cycle batteries discharge for hours to 50\u201380% DoD. Deep-cycling an SLI battery damages its thin plates.<\/p>\n<p><strong>How long does an SLI battery last?<\/strong> 3\u20135 years in moderate climates; 18\u201330 months in hot climates (35\u201345 \u00b0C). Heat is the primary accelerator of aging.<\/p>\n<p><strong>Are SLI batteries maintenance-free?<\/strong> Modern Ca-Ca grid SLI batteries are maintenance-free \u2014 no water topping required. Older Pb-Sb designs required periodic watering.<\/p>\n<h2>Related Articles<\/h2>\n<ul>\n<li><a href=\"\/jis-55b24\/\">55B24 Battery<\/a><\/li>\n<li><a href=\"\/jis-55d23\/\">55D23 Battery<\/a><\/li>\n<li><a href=\"\/jis-65d26\/\">65D26 Battery<\/a><\/li>\n<li><a href=\"\/jis-95e41\/\">95E41 Battery<\/a><\/li>\n<li><a href=\"\/jis-105d31\/\">105D31 Battery<\/a><\/li>\n<li><a href=\"\/jis-145g51\/\">145G51 Battery<\/a><\/li>\n<li><a href=\"\/jis-190h52\/\">190H52 Battery<\/a><\/li>\n<li><a href=\"\/din-56638\/\">56638 \/ DIN66 Battery<\/a><\/li>\n<li><a href=\"\/din-60038\/\">60038 \/ DIN100 Battery<\/a><\/li>\n<li><a href=\"\/agm-battery\/\">AGM vs SLI: Full Comparison<\/a><\/li>\n<li><a href=\"\/jis-battery-standard\/\">JIS Battery Standard Guide<\/a><\/li>\n<li><a href=\"\/din-battery-standard\/\">DIN Battery Standard Guide<\/a><\/li>\n<li><a href=\"https:\/\/data.chengguangenergy.com\/battery-models\/\" rel=\"nofollow\">All 14 Models \u2014 Full Specification Comparison<\/a><\/li>\n<li><a href=\"https:\/\/technical.chengguangenergy.com\/battery-technology\/sli\/\" rel=\"nofollow\">SLI Battery Technology Reference<\/a><\/li>\n<li><a href=\"https:\/\/chengguangenergy.com\/contact\/\">Request OEM Quote<\/a><\/li>\n<\/ul>\n<h2>Sources &amp; Verification<\/h2>\n<p>Specifications on this page are sourced from Chengguang Power Tech factory technical documentation and tested to JIS D 5301, DIN EN 50342-1, SAE J537, and IEC 60095-1. CCA figures are confirmed from the official Chengguang product specification (EN 50342-1). Contact Chengguang for the exact data sheet. Every batch ships with a Certificate of Analysis (CoA).<\/p>\n<p><em>Author: Chengguang Engineering Team \u00b7 Reviewed: IATF 16949 Quality Department \u00b7 Last updated: 2026-08-19<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"<p>SLI (starting, lighting, ignition) battery guide \u2014 how it works, the full 14-model Chengguang range (45\u2013200 Ah), CCA selection by engine, and JIS vs DIN\u2026<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":"","_llm_markdown_disabled":false},"categories":[125],"tags":[],"class_list":["post-297","post","type-post","status-publish","format-standard","hentry","category-battery-technology"],"_links":{"self":[{"href":"https:\/\/chengguangenergy.com\/es\/wp-json\/wp\/v2\/posts\/297","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/chengguangenergy.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/chengguangenergy.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/chengguangenergy.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/chengguangenergy.com\/es\/wp-json\/wp\/v2\/comments?post=297"}],"version-history":[{"count":1,"href":"https:\/\/chengguangenergy.com\/es\/wp-json\/wp\/v2\/posts\/297\/revisions"}],"predecessor-version":[{"id":799,"href":"https:\/\/chengguangenergy.com\/es\/wp-json\/wp\/v2\/posts\/297\/revisions\/799"}],"wp:attachment":[{"href":"https:\/\/chengguangenergy.com\/es\/wp-json\/wp\/v2\/media?parent=297"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/chengguangenergy.com\/es\/wp-json\/wp\/v2\/categories?post=297"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/chengguangenergy.com\/es\/wp-json\/wp\/v2\/tags?post=297"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}