95E41 Battery (W105/N100): Specs, Fitment, and Cross-Reference
Part of the JIS Battery Standard guide.
The 95E41 is a high-capacity JIS battery — 100 Ah and 750 CCA in an extra-long 410 mm case. It is built for large SUVs, light trucks, and diesel vehicles needing substantial starting power and reserve capacity. It is 150 mm longer than the 65D26.
Key Takeaways
- Specs — 100 Ah, 750 CCA in an extra-long 410 mm case for large SUVs and diesel vehicles.
- Aliases — W105 and N100 (Middle East/Africa) are the same case.
- Fitment — Toyota Land Cruiser (70–200 series), Nissan Patrol, Lexus LX.
- Cross-reference — BCI Group 49 (H8) and DIN 58827 (DIN88) are dimensional approximations only.
- Build — Ca-Ca alloy with reinforced plates for deep-discharge tolerance, 1,500–2,000 units/day.
Quick Reference
| المعلمة | المواصفات |
|---|---|
| Model | 95E41 |
| Also Known As | W105, N100 |
| قياسي | JIS |
| نوع البطارية | SLI |
| الجهد الاسمي | 12 V |
| السعة (C20) | 100 أمبير/ساعة |
| تصنيف CCA | 750 A (SAE) |
| الأبعاد (الطول × العرض × الارتفاع) | 410 × 176 × 213–233 mm |
| نوع المحطة | T1 small post |
| Polarity | Left (−), Right (+) — JIS type [0] |
| Hold-Down | B00 (الإطار العلوي) |
| الوزن التقريبي | 22–26 kg |
| Chengguang SKU | CG-JIS-95E41 |
Specification ranges: values are typical production ranges. Exact CCA and Ah vary by batch — request the technical data sheet for your order.
Case & Terminal Identification
The 95E41 uses an extra-long case (410 mm) with T1 small-post terminals. The label reads 95E41, W105, or N100. The 410 mm length is unmistakable — nearly twice the length of a 55B24.
| Identifier | Value | Check |
|---|---|---|
| Case length | 410 mm | Extra-long (E-series) |
| Case width | 176 mm | Slightly wider than D-series |
| Terminal | T1 small post | Small-diameter post |
| Hold-down | B00 | Top frame clamp |
تطبيقات المركبات
Large SUVs, light trucks, and diesel vehicles requiring 100 Ah+ capacity for high electrical loads or extended accessory use.
| Brand | Compatible Models |
|---|---|
| Toyota | Land Cruiser (70/80/100/200 series), Land Cruiser Prado (diesel) |
| Nissan | Patrol (Y61/Y62), Safari |
| Lexus | LX series |
| Large diesel SUVs/pickups | Applications requiring 750+ CCA |
Fitment is a market-based guide — verify tray (410 × 176 mm), terminal position, and hold-down type before ordering.
Regional Markets
| Region | Demand | ملاحظات |
|---|---|---|
| Africa | Major (#2 after 65D26) | Large SUV segment |
| Middle East | Strong | Large SUV segment |
| Southeast Asia | معتدل | Diesel SUV market |
| Oceania | معتدل | — |
Manufacturing & Grid Alloy
The 95E41 runs on Chengguang’s large-frame line in Jinzhou, Hebei, China (IATF 16949:2016 certified):
- Grid alloy — calcium-calcium (Ca-Ca) with reinforced plate design for deep-discharge tolerance.
- Grids — heavier than the D-series to support the 100 Ah class.
- Throughput — 1,500–2,000 units/day.
Testing & Quality Control
| اختبار | قياسي | Pass Criteria | Coverage |
|---|---|---|---|
| CCA Cold Cranking | SAE J537 at −18 °C | >750 A | 100% |
| Open Circuit Voltage | — | >12.60 V after formation | 100% |
| High-Rate Discharge | 30-second test | Voltage stability | 100% |
| Visual Inspection | — | Case, terminals, label, polarity | 100% |
| C20 Capacity | IEC 60095-1 | ≥95% of rated 100 Ah | Batch |
| Reserve Capacity | SAE J537 | 25 A to 10.5 V | Batch |
| Charge Acceptance | IEC 60095-1 | Current at 14.4 V | Batch |
| Vibration | JIS D 5301 | Severe duty | Batch |
| Thermal Cycling | −30 °C to +60 °C | No leakage, CCA retention | Type approval |
Charging & Service Life
- Charge voltage — SLI absorption 14.4–14.8 V; alternator output 13.8–14.4 V in service.
- Service life — 3–5 years temperate; 18–30 months in hot climates (35–45 °C). The 100 Ah capacity provides a buffer against heat-accelerated aging versus smaller batteries.
Sizing Check — Worked Example
A Land Cruiser 200 (4.5 L diesel) in a cold-adjacent market shows the 95E41’s role:
- Cold start. A 4.5 L diesel needs ~700–850 CCA. The 95E41’s 750 CCA clears the requirement; in a true −20 °C market, apply the ~20% margin (750 × 1.2 = 900 CCA) and confirm against the engine’s published cold-crank spec.
- Extended accessory use. The 100 Ah reserve supports winches, auxiliary lighting, and fridge loads that would drain a 65D26 quickly — 100 Ah at a 10 A accessory draw ≈ 10 hours to full discharge, or ~5 hours to the 50% depth-of-discharge safety line.
Cross-Reference
| Model | قياسي | Relationship |
|---|---|---|
| W105 | JIS | Alias — same case |
| N100 | JIS | Alias — Middle East/Africa designation |
N100 is the regional designation for the 95E41 — both indicate the 100 Ah class.
Cross-Standard Equivalents
| قياسي | Model | Confidence | Note |
|---|---|---|---|
| BCI | Group 49 (H8) | Low | Verify dimensions |
| DIN | 58827 (DIN88) | Low | Shorter case — verify fit |
Cross-standard matches are dimensional approximations only — electrical specs differ by standard and test method. Always verify tray dimensions, terminal type, and hold-down (B00 vs B13) before substituting.
OEM & Private Label Availability
The 95E41 is available for OEM manufacturing under your brand from Chengguang Power Tech:
- Custom label, case color, terminal type, and retail packaging
- Full batch traceability — raw material lot to shipping container
- 100% pre-shipment CCA and capacity testing with CoA
- تغليف تصديري متوافق مع معايير DG (رقم الأمم المتحدة 2794 / الفئة 8)
- Technical data sheet, MSDS, and Certificate of Analysis per shipment
Request OEM Quote · View OEM Process
الأسئلة الشائعة
What is N100? The Middle East/Africa designation for the 95E41 (100 Ah class); W105 is another alias.
Can a 95E41 replace a 65D26? No — it is 150 mm longer (410 vs 260 mm) and will not fit the tray. It suits large SUVs and diesels.
95E41 vs 105D31 — which for my vehicle? Measure the tray. The 95E41 fits 410 mm trays; the 105D31 fits 306 mm trays. Both are ~90–100 Ah class but not interchangeable.
Can a 95E41 be used for trucks? Not recommended — for commercial trucks use heavy-duty models (145G51, 190H52) with thicker Pb-Sb plates and vibration resistance.
Related Models
- 105D31 Battery — shorter (306 mm), similar 90 Ah class. Different fitment.
- 65D26 Battery — much smaller (260 mm), not a direct replacement.
- 95E41 — Full Specification
- JIS Battery Standard Guide
- Request OEM Quote
Author & Factory Credentials
Authored by the Chengguang Engineering Team — application and process engineers at Chengguang Power Tech, an automotive battery manufacturer in Jinzhou, Hebei, China. Content is reviewed by the IATF 16949 Quality Department against production data and third-party test reports before publication.
Factory certifications: IATF 16949 (automotive quality) · ISO 9001 (quality management) · ISO 45001 (occupational safety) · CE marking (EU compliance).
Full test reports and the Certificate of Analysis (CoA) are published on the Battery Database and ship with every order.
Sources & Verification
Specifications on this page are sourced from Chengguang Power Tech factory technical documentation and tested to JIS D 5301, DIN EN 50342-1, SAE J537, and IEC 60095-1. Contact Chengguang for the exact data sheet. Every batch ships with a Certificate of Analysis (CoA).
Author: Chengguang Engineering Team · Reviewed: IATF 16949 Quality Department · Last updated: 2026-08-19