57117 (DIN70) Battery for Passenger Cars: Application Guide

Part of the Passenger Cars guide.

The 57117 (DIN70) is a 70 Ah DIN battery in a 273 × 174 × 175 mm (ref.) case, European mid-size sedans — the 600 A (EN) (ref.) cold-cranking rating and 273 × 174 × 175 mm (ref.) case are the two numbers that decide fit.

Key Takeaways

  • Spec — 70 Ah C20, 600 A (EN) (ref.) CCA, 273 × 174 × 175 mm (ref.), B13 (bottom rail) hold-down, DIN post.
  • Application — passenger cars.
  • Fit — European mid-size sedans — the 600 A (EN) (ref.) cold-cranking rating and 273 × 174 × 175 mm (ref.) case are the two numbers that decide fit.
  • Usable capacity — ~35 Ah at 50% DoD for deep-cycling duty.

DIN70 Specifications

ParameterSpecification
Model57117
Also Known AsDIN70
StandardDIN
Capacity (C20)70 Ah
CCA Rating600 A (EN) (ref.)
Dimensions (L×W×H)273 × 174 × 175 mm (ref.)
Terminal TypeDIN post
Hold-DownB13 (bottom rail)

Passenger Cars Requirements → DIN70 Match

RequirementDIN70Verdict
Cold cranking (CCA)600 A (EN) (ref.)✓
Tray fit (case)273 × 174 × 175 mm (ref.)✓
MountingB13 (bottom rail)✓
Reserve for accessories70 Ah✓

Cross-Standard Equivalent

StandardEquivalentConfidenceNote
BCIGroup 48 (H6)MediumSame footprint — verify terminals

Cross-standard matches are dimensional approximations. Always verify tray length, terminal type, and hold-down before substituting.

Fitment Considerations

  • Match CCA to the engine: a larger engine or a diesel needs more cold-cranking current than the label capacity suggests.
  • The case must drop into the OEM tray — verify length/width/height and the hold-down style before ordering.
  • Reserve capacity — a higher Ah gives more accessory margin for stop-start and accessory-heavy cars.

What Buyers Should Ask

Before ordering the 57117 Battery — DIN70 for passenger-car, confirm these points with the supplier:

  • CCA standard — 600 A (EN); verify the test method (EN vs SAE) printed on the label matches your region’s convention.
  • Capacity — 70 Ah; enough reserve for the passenger-car accessory load.
  • Case fit — 273 × 174 × 175 mm (industry ref.); measure the tray and confirm the B13 (bottom rail) hold-down.
  • Terminals — Standard DIN post; check polarity and post type against the harness.
  • Data sheet — request the production Certificate of Analysis (CoA) for exact batch values.

Frequently Asked Questions

What engine does it start? European mid-size sedans — the 600 A (EN) (ref.) CCA covers European mid-size sedans. Check the OEM tray takes the 273 × 174 × 175 mm (ref.) case.

Higher Ah or higher CCA? CCA matters for cranking and Ah for accessory reserve. The 70 Ah / 600 A (EN) (ref.) balance suits European mid-size sedans.

Is a bigger battery always better? No — only if the tray fits and the charging system matches. Oversizing adds weight and cost without cranking benefit.

Related Articles

Sources & Verification

Specifications sourced from Chengguang Power Tech factory technical documentation and tested to DIN EN 50342-1, SAE J537, and IEC 60095-1. Figures marked “(ref.)” are third-party manufacturer catalog reference values — always confirm against the production data sheet. Every batch ships with a Certificate of Analysis (CoA).

Author: Chengguang Engineering Team · Reviewed: IATF 16949 Quality Department · Last updated: 2026-08-26

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *