57117 (DIN70) Battery for Passenger Cars: Application Guide
Part of the Passenger Cars guide.
The 57117 (DIN70) is a 70 Ah DIN battery in a 273 × 174 × 175 mm (ref.) case, European mid-size sedans — the 600 A (EN) (ref.) cold-cranking rating and 273 × 174 × 175 mm (ref.) case are the two numbers that decide fit.
Key Takeaways
- Spec — 70 Ah C20, 600 A (EN) (ref.) CCA, 273 × 174 × 175 mm (ref.), B13 (bottom rail) hold-down, DIN post.
- Application — passenger cars.
- Fit — European mid-size sedans — the 600 A (EN) (ref.) cold-cranking rating and 273 × 174 × 175 mm (ref.) case are the two numbers that decide fit.
- Usable capacity — ~35 Ah at 50% DoD for deep-cycling duty.
DIN70 Specifications
| Parameter | Specification |
|---|---|
| Model | 57117 |
| Also Known As | DIN70 |
| Estándar | DIN |
| Capacity (C20) | 70 Ah |
| CCA Rating | 600 A (EN) (ref.) |
| Dimensions (L×W×H) | 273 × 174 × 175 mm (ref.) |
| Terminal Type | DIN post |
| Hold-Down | B13 (bottom rail) |
Passenger Cars Requirements → DIN70 Match
| Requirement | DIN70 | Verdict |
|---|---|---|
| Cold cranking (CCA) | 600 A (EN) (ref.) | ✓ |
| Tray fit (case) | 273 × 174 × 175 mm (ref.) | ✓ |
| Mounting | B13 (bottom rail) | ✓ |
| Reserve for accessories | 70 Ah | ✓ |
Cross-Standard Equivalent
| Estándar | Equivalent | Confidence | Note |
|---|---|---|---|
| BCI | Group 48 (H6) | Medium | Same footprint — verify terminals |
Cross-standard matches are dimensional approximations. Always verify tray length, terminal type, and hold-down before substituting.
Fitment Considerations
- Match CCA to the engine: a larger engine or a diesel needs more cold-cranking current than the label capacity suggests.
- The case must drop into the OEM tray — verify length/width/height and the hold-down style before ordering.
- Reserve capacity — a higher Ah gives more accessory margin for stop-start and accessory-heavy cars.
What Buyers Should Ask
Before ordering the 57117 Battery — DIN70 for passenger-car, confirm these points with the supplier:
- CCA standard — 600 A (EN); verify the test method (EN vs SAE) printed on the label matches your region’s convention.
- Capacity — 70 Ah; enough reserve for the passenger-car accessory load.
- Case fit — 273 × 174 × 175 mm (industry ref.); measure the tray and confirm the B13 (bottom rail) hold-down.
- Terminals — Standard DIN post; check polarity and post type against the harness.
- Data sheet — request the production Certificate of Analysis (CoA) for exact batch values.
Preguntas frecuentes
What engine does it start? European mid-size sedans — the 600 A (EN) (ref.) CCA covers European mid-size sedans. Check the OEM tray takes the 273 × 174 × 175 mm (ref.) case.
Higher Ah or higher CCA? CCA matters for cranking and Ah for accessory reserve. The 70 Ah / 600 A (EN) (ref.) balance suits European mid-size sedans.
Is a bigger battery always better? No — only if the tray fits and the charging system matches. Oversizing adds weight and cost without cranking benefit.
Related Articles
- 56638 (DIN66) for Passenger Cars
- 57219 (DIN72) for Passenger Cars
- 57117 Battery — Full Specs
- Passenger Cars Guide
- Request OEM Quote
Sources & Verification
Specifications sourced from Chengguang Power Tech factory technical documentation and tested to DIN EN 50342-1, SAE J537, and IEC 60095-1. Figures marked “(ref.)” are third-party manufacturer catalog reference values — always confirm against the production data sheet. Every batch ships with a Certificate of Analysis (CoA).
Author: Chengguang Engineering Team · Reviewed: IATF 16949 Quality Department · Last updated: 2026-08-26
