57219 (DIN72) Battery for Passenger Cars: Application Guide

Part of the Passenger Cars guide.

The 57219 (DIN72) is a 72 Ah DIN battery in a ~278 × 175 × 190 mm (ref.) case, European mid-to-upper sedans — the 630 A (EN) (ref.) cold-cranking rating and ~278 × 175 × 190 mm (ref.) case are the two numbers that decide fit.

Key Takeaways

  • Spec — 72 Ah C20, 630 A (EN) (ref.) CCA, ~278 × 175 × 190 mm (ref.), B13 (bottom rail) hold-down, DIN post.
  • Application — passenger cars.
  • Fit — European mid-to-upper sedans — the 630 A (EN) (ref.) cold-cranking rating and ~278 × 175 × 190 mm (ref.) case are the two numbers that decide fit.
  • Usable capacity — ~36 Ah at 50% DoD for deep-cycling duty.

DIN72 Specifications

ParameterSpecification
Model57219
Also Known AsDIN72
EstándarDIN
Capacity (C20)72 Ah
CCA Rating630 A (EN) (ref.)
Dimensions (L×W×H)~278 × 175 × 190 mm (ref.)
Terminal TypeDIN post
Hold-DownB13 (bottom rail)

Passenger Cars Requirements → DIN72 Match

RequirementDIN72Verdict
Cold cranking (CCA)630 A (EN) (ref.)✓
Tray fit (case)~278 × 175 × 190 mm (ref.)✓
MountingB13 (bottom rail)✓
Reserve for accessories72 Ah✓

Cross-Standard Equivalent

EstándarEquivalentConfidenceNote
BCIGroup 48 (H6)MediumSame footprint — verify terminals

Cross-standard matches are dimensional approximations. Always verify tray length, terminal type, and hold-down before substituting.

Fitment Considerations

  • Match CCA to the engine: a larger engine or a diesel needs more cold-cranking current than the label capacity suggests.
  • The case must drop into the OEM tray — verify length/width/height and the hold-down style before ordering.
  • Reserve capacity — a higher Ah gives more accessory margin for stop-start and accessory-heavy cars.

What Buyers Should Ask

Before ordering the 57219 Battery — DIN72 for passenger-car, confirm these points with the supplier:

  • CCA standard — 630 A (EN); verify the test method (EN vs SAE) printed on the label matches your region’s convention.
  • Capacity — 72 Ah; enough reserve for the passenger-car accessory load.
  • Case fit — ~278 × 175 × 190 mm (industry ref.); measure the tray and confirm the B13 (bottom rail) hold-down.
  • Terminals — Standard DIN post; check polarity and post type against the harness.
  • Data sheet — request the production Certificate of Analysis (CoA) for exact batch values.

Preguntas frecuentes

What engine does it start? European mid-to-upper sedans — the 630 A (EN) (ref.) CCA covers European mid-to-upper sedans. Check the OEM tray takes the ~278 × 175 × 190 mm (ref.) case.

Higher Ah or higher CCA? CCA matters for cranking and Ah for accessory reserve. The 72 Ah / 630 A (EN) (ref.) balance suits European mid-to-upper sedans.

Is a bigger battery always better? No — only if the tray fits and the charging system matches. Oversizing adds weight and cost without cranking benefit.

Related Articles

Sources & Verification

Specifications sourced from Chengguang Power Tech factory technical documentation and tested to DIN EN 50342-1, SAE J537, and IEC 60095-1. Figures marked “(ref.)” are third-party manufacturer catalog reference values — always confirm against the production data sheet. Every batch ships with a Certificate of Analysis (CoA).

Author: Chengguang Engineering Team · Reviewed: IATF 16949 Quality Department · Last updated: 2026-08-26

Publicaciones Similares

Deja una respuesta

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *